NEWS

Choosing uPVC Replacement Window Handles

Many customers agree that replacement handles made of upvc are easy to install and feel great. It's crucial to understand fix that the handle you select for your window has to be suitable.

The primary factor is the step height that refers to the space between the nose of the handle to the base or frame. Other factors to consider are lockable mechanisms and designs.

replacement handles for upvc windows parts

You can buy a variety of replacement handles made of upvc. There are numerous styles and colours to choose from, so you're sure to find one that will match the windows you have. It's easy for you to make an impulse purchase, especially when the handle is damaged. Therefore, it is best to do some research before buying an alternative. First, you must know what type of upvc handles you have and what the differences between them. The table below shows the most common handles to help you find the one that fits your windows made of upvc.

The majority of double-glazed windows come with epag handles. They are typically attached to the frame by two screws that screw into the frame from both sides, above and below.

The spindle bar at the back could be of different sizes, and will determine if they're left-handed or right-handed. It is important to determine the measurements of the handle you currently need to ensure you get the appropriate replacement.

Usually, they are fixed with two bolts much like the Espag handle, they have a low projection from the frame which means that the handle won't poke through your blinds. This is a great choice when you want the handle to blend in with your blinds, and you have upvc windows.

Cockspur handles are similar to Espag handles, however they have a nose that closes over a wedge, which is placed on the frame of the window. This type of handle can be found on older wooden and upvc windows.

On casement windows the tilt and turn handles can be operated by either turning the handle or pressing the top of the window. This allows you to open the window from inside and clean it from outside without the need to climb a ladder or step across the fence. These are ideal for those who have limited mobility and enhance security and access to the home.

Tips and suggestions and

There are a number of different kinds of uPVC window handles, and many people will need to replace them at some point. If this happens, it's a good idea to know a few hints and tricks that will make the process be as smooth as it can.

Find out what kind of handle is in your home. Depending on the type of handle and the locking mechanism, it could be necessary for you to replace the handle and lock. If the roller cams or shoot bolts (espags) are blocked or seizing up, you'll have to replace them along with the handle.

Thankfully, the majority uPVC handles adhere to industry standards and are very alike. This makes replacing them an simple task. The first step is to remove the screws from the handles. These are usually the pozi-drive screws. Once they are removed, you are able to take the handle apart.

It's a good idea to keep track of how much the spindle sticks out from the base of your handle when you remove it. This will allow you to determine the length of the spindle for the replacement handle. To do this, simply determine the length of the square peg sticking out from the base of the handle and use this as a reference.

This is particularly important for inline uPVC window handles because they are always straight and will only open left or right, and will not operate in the middle. It's a good idea if you're not sure of the type of handle you have at your home to borrow a handle and check out how it works.

You can also determine the handiness of a uPVC window by watching the way the handle turns when it is in use. Handles that are hand-operated will turn clockwise or anti-clockwise. If you're unsure it's possible to ask someone else to open the window using the handle, and figure out how it works in this manner.

Find the spindle's measurement.

It can be difficult to choose the right replacement handle for your window since different handles do not have the same dimensions. The spindle is the part that controls the locking mechanism inside the window. It is crucial that when fitting the new handle it is measured to the spindle length accurately to ensure that it will fit. There are many different kinds of uPVC window handles, and they operate in different ways, so it is vital to know the type of handle you have as well as the type of locking system that you are using.

Espag handles come with a spindle that extends from the rear of the handle and goes into the lock gearbox within the window frame. When you turn the handle, this is then a way to turn the lock in the gearbox, allowing you to open the window. They are used on uPVC windows with casement and can be locked using keys to increase security.

Cockspur handles are equipped with a "nose" that closes over an elongated striker block that is placed on the frame. They are typically found on older double-glazed uPVC windows. They are also easy to use and can be locked using keys. These handles are a little more difficult to find replacements for since they aren't as well-known as the handles with a espagnolette.

If you have a tilt and turn uPVC then you'll require a replacement handle with an alternative locking system. The handle can tilt the window, and allow it to rotate back and forth to fully open it. It is essential to make sure that the handle you select has a spindle length of at least 55mm or it will not be able to reach into the frame of the window.

The same procedure can be used to remove and replace the uPVC handle. However, you will have to be careful when unscrewing it. It might be necessary to open the window a bit wider than normal to access both screws that secure it to the frame. Once you have put in your new uPVC handles and confirmed that they are in the proper position and tighten the screws and then test to ensure the lock is working correctly.

Install the new handle

Once you have the right handle replacement it is easy to screw into place. This will require a screwdriver and may be easier with an electric one. When screwing, it is important not to over tighten the screws as this could cause the handle to warp or crack.

The second step in installing the new handle is to insert the spindle. This is the component that is inserted into the handle and is responsible for operating the locking mechanism within the window. It is essential that it is installed correctly since this will ensure that the window is able to be closed and opened with confidence.

There are several different types of uPVC window handles. These include:

Espagnolette Handles are inline handles that can be used to open tilt and turn windows.

Cranked Espagnolette Handles: These are similar to inline handles, but have a curved design that can be useful for hard-to-reach windows.

Tilt and turn handles They are used to operate the opening and closing mechanisms on tilt and move windows.

They are the most popular and the majority of uPVC windows have these in place. They are often referred to as 'Bay Windows' in the UK.

If your uPVC window handle is broken, it can be extremely frustrating. There isn't any need to replace the entire uPVC window just because of a broken handle. There are a number of easy steps you can take to repair or replace a damaged uPVC window handle.

By identifying the type of window you have, calculating the spindle length and purchasing an appropriate handle, you can easily fix your broken window handle. When working with tools and windows, it is important to consider safety first. But, this is a relatively easy task. It could mean the difference between having a secure and secure home or a window that can be easily opened. If you have any concerns or want to talk with a professional regarding replacing the handle on your window, call Bridgewater Glass. Our team is skilled and knowledgeable to assist you with any issue.