NEWS

Choosing uPVC Replacement Window Handles

Almost all customers agree that these upvc replacement Window replacement Cost handles are easy to fit and feel like good quality. However, it's important to know that the type of handle you select is the one that's right for your window.

The key factor is the step height that is the distance from the nose of the handle to the frame or base. Other factors to consider are lockable mechanisms and designs.

Replacement parts

You can purchase a range of replacement handles made of upvc. They come in a variety of styles and colors, so there's bound to be something that will fit your windows. It's easy for you to buy something on impulse especially when the handle is damaged. Therefore, it is best to look over a few aspects before purchasing an alternative. First, you need to know what type of handles made from upvc you have and what the differences are between them. The table below shows the most common handles to help you identify the one that fits your upvc windows.

The majority of double-glazed windows come with handles that are epag. They are usually fitted to the frame using two screws that are screwed in from both sides.

The spindle bar on the back may be of different sizes, and can determine if they are left-handed or right-handed. It is essential to know the measurements of the handle you have to ensure that you purchase the appropriate replacement glass for windows.

The arm is fixed to the frame using two bolts, much like the Espag handle. The arm has a low projection so that it doesn't damage your blinds. This is a great choice when you want the handle to blend with your blinds and windows made of upvc.

Cockspur handles look similar to Espag handles, but they have a nose which closes over a wedge which rests on the frame of the window handles replacement. This kind handle is found on older wooden and upvc windows.

On casement windows tilt and turn handles are operated by turning the handle or pressing the top of the window. This allows you to open the window from inside and clean it from outside without the need to climb a ladder or walk across the fence. They're ideal for those with mobility issues, and can enhance security and access to the home.

Tips and suggestions and

There are many different types of uPVC window handles, and window replacement cost lots of people will have to replace them at some time. If this happens, it's a good idea to know a few hints and tricks that will assist in making the task go as smoothly as possible.

The first step is determine the type of handle you have at home. Depending on the type of handle and locking mechanism, it could be necessary for you to replace the lock and handle. For instance, if shoot bolts (espag) and roller cams are jammed or seizing the handle, you'll need to replace them as well as the handle itself.

Thankfully, the majority of uPVC handles are very similar and adhere to industry standard sizing, which makes replacing them a relatively simple task. The first step is to remove the screws from the handles. These are usually the pozi-drive screws. Once the screws are removed, you will be able to dismantle the handle.

It's a great idea to take note of how far the spindle sticks out from the base of your handle when you remove it. This will enable you to measure the length of the spindle to determine the replacement handle. To do this, simply take a measurement of the square peg sticking out from the base of the handle and Window Replacement Cost use that as a guide.

This is especially important for inline uPVC window handles because they will always be straight and open left or right, and will not operate in the middle. If you're not sure what kind of handle you have at home, it can be an excellent idea to borrow the handle from your neighbor's home and observe the way it works to get an idea.

You can also determine the handiness of a uPVC window by observing the way the handle turns when it is in use. Handles that are hand-operated will turn clockwise or anti-clockwise. If you're not sure, you can always ask someone else to open the window with the handle and figure out how it operates in this manner.

Find the spindle's measurement.

Choosing the correct replacement handle for your windows can be a challenge as not all handles are the same size. The spindle operates the locking mechanism inside the window and it is crucial to ensure that when installing the new handle that you measure the spindle length accurately to ensure that it fits. There are several different types of uPVC window handles that operate in different ways so it is vital that you know which kind of handle you have and the type of locking system.

The spindle of the espag handle extends out from the handle's rear and is attached to the lock gearbox in the window frame. When you turn the handle, it then turns the lock in the gearbox and opens the window. They are usually utilized on uPVC casement windows and they can be locked using keys to offer additional security.

Cockspur handles are commonly found in older double-glazed uPVC window frames. They are characterized by a "nose" that is secured by a wedge-shaped striker block. They are also fairly easy to install and can be locked with keys. These handles are slightly more difficult to find replacements for as they aren't as popular as the handles with a espagnolette.

If you have a tilt and turn uPVC window, then you'll need to get a special type of uPVC replacement handle with a different locking mechanism. It can open the window, but also turn it inwards and outwards to fully open it. You should select the handle with a spindle of at least 55mm in order to be able to reach the window frame.

The same procedure can be used to remove and replace the uPVC handle. However, you'll need to take care when you remove it. It may be necessary to open the window more than normal to reach both screws that hold it to the frame. Once you have put in your new uPVC handles and verified that they are in the right position and tighten the screws and test the lock to ensure it is working correctly.

Install the new handle

Once you have the correct replacement handle it is easy to screw in place. It will require a screwdriver, and an electric one could be easier. When screwing the screws in, it is important not to over tighten the screws because this could cause the handle to warp or crack.

The other important step when installing the handle is to insert the spindle. This is the part that runs through the handle and operates the locking mechanism within the window. It is important that the part is fitted correctly to permit the window to open and shut securely.

There are a variety of types of uPVC handles. They include:

Espagnolette Handles are handles inline which can be used to open tilt windows and turn them.

Cranked Espagnolette Handles: These are similar to inline handles, but have a curved shape which is ideal for hard-to reach windows.

Tilt and turn handles These are used to operate the opening and closing mechanisms when tilting and turn. They also move windows.

The majority of uPVC window frames come with these. In the UK they are often called "Bay Windows".

If your uPVC window handle is broken, it can be very frustrating. There is no need to replace the entire uPVC windows due to a broken window handle. There are several easy steps that can be taken to repair and replace a broken uPVC window handle.

You can repair your broken window handle quickly by identifying the type and determining the spindle. It is crucial to be patient and prioritize safety when working with windows or tools, but this is a relatively easy task. It can make all the difference between a secure and secure home or a unsecured open window! If you have any concerns or would like to speak with a professional regarding replacing the handle on your window, call Bridgewater Glass. We have a team of experienced and knowledgeable professionals who are able to help with any issues you might be experiencing.